Sale!

Laird 24A1000E 2.4Ghz 802.11G AGC 1 Watt Amplifier

$300.00 $20.00

Laird 24A1000E 2.4Ghz 802.11G AGC 1 Watt Amplifier

Out of stock

SKU: 24A1000E Category: Tags: ,

Description

Designed for extending the range of 2.4 GHz wireless radio devices, the
amp is particularly effective when used with Direct Sequence or
Frequency Hopping Spread Spectrum radio modems. The unit provides
the transmit power amplification as well as receive signal gain.

The built-in dynamic power sensor in amp adjusts the Radio
Frequency (RF) power output level by reading the input signal power.
This Automatic Gain Control (AGC) Technology,  “Plug & Play” amp delivers
the maximum output power at various input levels while keeping the
distortion at a minimum.

Ideal for increasing the range of low power radio devices and to
compensate for cable loss in certain installations.


Technical Specifications
Features:1 Watt Outdoor
Operating Range:2400 – 2500 MHz
Operating Mode:Bi-directional, TDD
Transmit Gain*:up to 24 dB
Frequency Response:± 1 dB
Output Power:1 Watt (+30 dBm)
TX Input Power:0 dBm min
23 dBm max
Receiver Gain:16 dB typical
Noise Figure:3.5 dB typical
LED Inidicators:
RED

GREEN/ORANGE

Solid On: Power
and Receiving mode
Off: No Power

Blinking: Transmitting

Connectors:N-type, female, 50 Ohm
Lightning Protection:Quarter Wave Technology
DC Surge Protection:Available
Power Consumption:Tx = 1.2 A, Rx = 130 mA @ 9V DC
Operating Temperature:-40 °C to + 70 °C
Dimensions:4.25″ L x 3.25″ W x 1.75″ H

Additional information

Weight5 lbs
Dimensions12 × 12 × 4 in